Eplus3D Tech Co., Ltd.
Eplus3D Tech Co., Ltd.
Additive Manufacturing Polymer Material

Additive Manufacturing With PA12 GF

Polyamide 12 GF  is an ideal material for many industries, including Injection Molding.

The powder has been tested for use on Eplus3D's SLS 3D printers. Eplus3D also offers a wide range of validated processes for the above materials to ensure that the performance of the 3D printed parts is fully met.

EPLUS 3D Polyamide 12 Filled With Glass Beads

Glass-filled nylon powder is a mixture of nylon powder and glass beads, which is more durable than standard nylon powder. The material has good wear resistance, high strength and can be used in high temperature or under the conditions that a particularly high thermal deformation temperature is required.

Typical Part Properties:

Tensile Strength 51 MPa

Tensile Modulus 3200MPa

Elongation at Break 9 %


Melting temperature (20°C/min)  176°C

Typical application areas:

Injection Molding

EPLUS 3D Polyamide 12 Filled With Glass Beads
Contact EPLUS 3D
With more than 25 years' of AM technology accumulation, Eplus3D strives to bring you long-term success, from a professional start in industrial 3D Printing solutions to qualified system maintenance and globally available support. Get in touch with us today and we'll find the tailored solution to fit your needs as soon as possible!

The foregoing consents may be withdrawn at any time. For this purpose I can contact Eplus3D by an e-mail to info@eplus3d.com or in any other manner.